Battery Charge
Left
RCBR-13030 Power Pack 13000mAh
User Manual
This product is designed to charge electronic devices with DC5V USB input
Product Overview
Box Content
To use the LED flashlight, press the power button two times in quick succession to turn on. Repeat the
action to turn off. The light can run continuously for up to 600 hours on a full charge.
Press the power button once to check the four LED status lights to show how much charge is left.
Power indicator
One light on
Two lights on
Three lights on
Four lights on
When charging Power Pack:
- The power indicators will light up in the relating positions showing the current charge status.
- If the power indicator lights are continuously on, the recharge is complete.
When charging other devices, press the power button:
- Power indicators will light up in the relating positions
showing available charge capacity.
- If the power indicator does not light up, the Power Pack
is out of power and needs to be recharged.
Power Pack
Micro-USB Charging Cable
User Manual
x1
x1
x1
Power Pack not charging
:
- Ensure Power Pack is properly connected to the power source. Check for loose connections.
- Check the USB charge cable. Is it still working?
- Ensure the power source is functioning. Try a different power source.
- If charging through a computer USB port, ensure the computer is powered on and active.
Devices are not charging:
- Press the power button to check LED Status indicator for available charge capacity.
- The power requirement of the device is not compatible with the Power Pack.
- Ensure the Power Pack is properly connected to the device. Check for loose connections.
- The charging cable may no longer be functioning. Please try using a different cable.
- If you accidentally connected the Power Pack’s input port to the output port, the short circuit
protection will kick-in. To reset a short circuit-protection, please disconnect all cables and then
connect the Power Pack to a source to charge.
110V~220V
1. Connect the included USB charging cable to a power supply such as an AC adapter, USB wall charger,
or a computer USB port.
2. Connect the other end to the Power Pack’s micro-USB input to recharge.
AC: Power Adapter
Computer USB port
- Keep Power Pack dry and away from damp and erosive environments.
- Do not disassemble.
- Do not store Power Pack in extreme temperature environments.
RCBR-13030 Power Pack 13000mAh
User Manual
RCBR-13030 Power Pack 13000mAh
User Manual
RCBR-13030 Power Pack 13000mAh
User Manual
LED Flashlight
Recharge Power Pack
RCBR-13030 Power Pack 13000mAh
User Manual
RCBR-13030 Power Pack 13000mAh
User Manual
RCBR-13030 Power Pack 13000mAh
User Manual
RCBR-13030 Power Pack 13000mAh
User Manual
RCBR-13030 Power Pack 13000mAh
User Manual
Micro-USB Input Port
2A USB Output Port
LED Flashlight
1A USB Output Port
LED Indicator
Power Button
＜
25% 25—50% 50—75% 75—100%
Charging Status Indicator
Technical Specification
Product Caring
Troubleshooting
Capacity
Battery
Input
Output1 / Output2
13000 mAh
Lithium Ion Samsung Cell
Micro-USB 5V
5V 2A / 5V 1A
Weight
Dimension
Input Charging Time
Battery Life
10.86 oz
3.07 x 5.00 x 0.94 inch
Approx. 10 hours*
>500 cycles
Power Indicator
*Depending on power source charging current
www.rosewill.com
Thank you for purchasing a High-Quality Rosewill Product.
Please register your product at :
http://www.rosewill.com
for complete warranty information and future support for your product.
If you have any questions while using our product, please feel free to contact us.
Support Phone Number: 800-575-9885
Support Email: techsupport@rosewill.com
Visit our website: www.rosewill.com
Charging Other Devices
The Power pack has two USB output ports capable of charging two devices simultaneously.
1A output port is designed for mobile phones and MP4 or GPS devices. The 2A output port is designed
for tablet PCs or other devices requiring a higher charging current, such as an iPad. (please refer to your
device’s manual for required charging current. Samsung Galaxy Tab needs another special charging
connector)
If an incompatible device is not charging after connecting to the Power Pack, there will be no damage to
your device. As long as your device charges through USB, either port can be used for charging so there is
no need to worry about using the wrong USB port.
If you charge through the 2A port, it will take less time to charge your device due to the higher amperage.
However, the battery efficiency will be lower. For example: if charging a certain device with the 1A port,
the Power Pack can fully charge it four times, and the charging time is about 120 minutes for each full
charge. If charging the same device via the 2A port, it can fully charge the device 3.5 times, but a full
charge would take roughly only 80 minutes.
1. Connect the Power Pack’s output port to your device’s charging port with a USB cable.
2. Press the power button to start charging.
3. 60 seconds after fully charged or disconnecting your charging device, the Power Pack will
automatically enter power savings mode and shut off power to the output port.
