7
Power Receptacle
To be compatible with the electric service standards around the world, the
switch is designed to afford the power supply in the range from 100 ~
240VAC, 50/60Hz. Please make sure that your outlet standard to be
within this range.
To power on the switch, plug the female end of the power cord firmly into
the receptacle of the switch and the other end into an electric service
outlet. After the power cord installation, please check if the power LED is
illuminated for a normal power status.
Installation
This switch can be placed on your desktop directly, or mounted in a rack,
or mount on wall. The installation is a snap. Users can use all the
features of the switch with simply attaching the cables and turning the
power on.
Before installing the switch, we strongly recommend:
1.
The switch is placed with appropriate ventilation environment. a
minimum 25mm space around the unit is recommended.
2.
The switch and the relevant components are away from sources of
electrical noise such as radios, transmitters and broadband
amplifiers
3.
The switch is away from environments beyond recommend
moisture
Desktop Installation
1.
Install the switch on a level surface that can support the weight of
the unit and the relevant components.
2.
Plug the switch with the female end of the provided power cord
and plug the male end to the power outlet.
Wall mount Installation
1.
Screw the two provided screws into the wall 150 mm apart
