6
Front Panel
The front panel consists of LED indicators and the ports.
16 Port 19-inch Model
Gigabit Ethernet Ports:
The switch includes 16 gigabit twisted pair ports, each supporting auto
negotiable 10/100/1000 Mbps and auto MDI/MDIX cross over detection
functions. This function provides true “plug and play” capability. These
ports can operate in half-duplex mode for 10/100 Mbps.
LEDs Definition:
The switch contains one power LED for the device, Link/Act LEDs for
each port that shows the activities and information of the ports.
LED
Status
Operation
Power
Steady Green
The switch is powered on
Off
The switch is powered off
Link/ ACT
Steady Green
Valid port connection
Blinking Green
Valid port connection and there is
data transmitting/ receiving
Off
Port disconnected
Rear Panel
The back panel is shown as bellow (it contains a three pronged
receptacle):
16 Port 19-inch Model
Power Receptacle
To be compatible with the electric service standards around the world, the
switch is designed to afford the power supply in the range from 100 to
240VAC, 50/60Hz. Please make sure that your outlet standard to be
within this range.
To power on the switch, plug the female end of the power cord firmly into
the receptacle of the switch and the other end into an electric service
outlet. After the power cord installation, please check if the power LED is
illuminated for a normal power status.
