9
Cable Connections
RJ-45 (10BASE-T): Category 3,4,5 UTP/STP
RJ-45 (100BASE-TX): Category 5 UTP/STP
RJ-45 (1000BASE-T): Category 5e, 6 or
enhanced UTP/STP
Network
Data Rate
10/100/1000 Mbps Auto-negotiation
Transmission Mode
10/100Mbps: Full-duplex, Half-duplex
1000Mbps: Full-duplex
LED Indications
System: Power
Ports: Link/ACT
MAC Address Table
8K
Buffer Memory
256K bytes
Jumbo Frame
9K bytes
QoS
802.1p (4 Queues)
Operating Temperature
Operating Temperature: 0~40
℃
Storage Temperature:
-10 ~ 70
℃
Operating Humidity
Operating: 10%~90%, non-condensing
Storage: 5% ~ 90%, non-condensing
Power Supply
Internal power supply 5V/2A
100-240V/50-60 Hz 0.5A, MAX universal input
Emission
FCC, CE, VCCI Class A
Appendix A: Troubleshooting
1.
The Power LED is not lit
Make sure the AC power cord connected the Switch with
power source properly.
Make sure the power source is ON.
2.
The Link/Act LED is not lit when a device is connected to the corresponding
port
Make sure that the cabl
e connectors are firmly plugged into
the Switch and the device.
Make sure the connected device is turned on and working well.
The cable must be less than 100 meters long (328 feet).
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete warranty
information and future support for your product.
Rosewill Customer Service Hotline: 1-800-575-9885
Rosewill Customer Service Support:
techsupport@rosewill.com
