5 in 1 Cable Tester
RTK-T05 User Manual
3
․
Do not use this tester if it has undergone long-term storage under unfavorable conditions.
․
Do not use the tester if it has been managed in transport.
․
Avoid usage near strong magnetic fields (magnets, loudspeaker, transformers, motors, coils, Relays, contactors,
electromagnets, etc.). The tester may display readings that are in error.
․
Avoid usage near strong electrostatic fields (high voltage power lines, televisions, computer monitors, etc.). The
tester may display readings that are in error.
․
Avoid usage near strong RF fields (radio or television transmitters, walkie talkies, cellular phones etc.). The tester
may display readings that are in error.
․
Remove the battery when the tester may be left unused for longer than 1 month. Chemical leakage from the
battery could damage the tester.
․
Do not use the tester if there is evidence of chemical leakage from the battery.
3. PRODUCT FEATURES
․
Test 5 types of cables
․
Simple one button tester
․
Ergonomic portable handheld design
․
Tests installed wiring or patch cables
․
Remote unit stores in Main unit
․
600 ft tester distance (RJ-45/RJ-11/BNC)
․
Convenient battery access
․
Built in battery test
․
LEDs indicate connections and faults
․
Beeper provides audible annunciation of tester results
․
Tests shielded (STP) or unshielded (UTP) LAN cables
․
Test shields in 1394 and USB cables
4. SPECIFICATIONS
․
Cable Tested
a)
UTP and STP LAN cables Terminated in RJ-45 male connectors. (EIA/TIA
568)
b)
RJ-11 Cables with male connectors, 2 to 6 conductors installed.
c)
1394 cables with type 1 plugs on both ends.
d)
USB cable with Type 1 flat plug on one end and type B square plug on other end.
e)
BNC cables with male connectors.
․
Faults Indicated:
No connection, Short, Open, Cross.
․
Low Battery Indicator:
LED lights to indicate low battery
․
Case Dimensions:
7.25 x 4.9 x 1.0 Inches (L x W x H)
