5 in 1 Cable Tester
RTK-T05 User Manual
4
․
Weight:
2.2 grams (without battery)
․
Battery:
1 pc standard 9 Voltage alkaline battery. (not included)
5.
FRONT PANEL & 5 IN 1 DLAGRAM
C
ab
le
T
es
te
r
S/G
․
Test Button
․
Main Display
․
RJ-45 Jack
․
RJ-11 Jack
․
1394 Jack
․
USB Jack
․
BNC Jack
6.
OPERATION
General Information
The 5 in 1 Cable Tester performs its tests when the single button on its front panel is pressed and released. 6 status
LEDs indicate the condition of the cable being tested, as well as informing the user that Power is turned on, and that the
battery is good (or bad). 8 additional connection LEDs light to indicate that specific writes in a cable are connected. A
chart beneath the 8 LEDs shows the LEDs that should light for a good cable.
The MAIN and REMOTE unit
The 5 in 1 Cable Tester consists of a Main unit and a Remote unit. The Remote unit stores conveniently on the bottom of
the Main unit. It can be removed or replaced by sliding it from left to right or right to left respectively. Use care when
