background image

- 12

 Ž

 

Drive device

ROTISSERIE

In hand position, the oven must be stopped manually by returning the function selector
and thermostat knobs to the stop position.

For programming with immediate start and cooking duration, the oven stops
automatically once the time has elapsed and an audible alarm sounds. To stop the
alarm, turn the button to display        in the little window.

Return the function selector and thermostat knobs to the stop position.

> The cooking start time can be delayed...

To set the start time: pull out and turn the button to the right to put the ‘C’ pointer to
the required starting time, and release it.

To set the cooking duration: turn the button clockwise, without pulling, to display
the time required to cook the food.

The oven starts at the programmed time and stops operating automatically once
the time has elapsed. The end of cooking time is signalled by an alarm that rings
for several minutes. To stop the alarm, turn the button to display          and return
the function selector and thermostat knobs to the stop position.

This consists of one skewer, two forks and a spit holder.

. Take all the accessories out of the oven.
. Place the deep tray at the bottom.
. Put the food onto the skewer, and centre between the two forks.
. Put the skewer onto the holder.
. Slide the holder and skewer into the second shelf position from the bottom.
. The end of the turnspit should be opposite the opening of the drive device.
. Engage the turnspit in the drive device.

Fitting the turnspit diagonally:

 Œ

No preheating is required for Rotisserie cooking.

Rotisserie cooking is carried out with the door closed.

Summary of Contents for Bocuse





































Reviews: