ROSIERES RIED7340BV, Instructions For Use And Installation

E`efdgUf[a`e Xad NeW

U^[d j^[ fem[h _i im_jY^[Z ed1 j^[ Xkpp[h m_bb

Operating instructions

--

Boost function 

Warning: 

2. The boost function works on all cooking zones.

Cancelling the "BOOST" mode 

1.Press the "      " key, all the indicators show "--". 

Press the“     " key, the power level indicator showing "    "

4 GB

iekdZ edY[

WdZ Wbb j^[ _dZ_YWjehi m_bb Yec[ ed \eh ed[ i[YedZ WdZ j^[d

]e ekj3 R^[ ^eX _i dem _d ijWdZXo ceZ[3 ObWY[ j^[ fWd _d

j^[ Y[djh[ e\ j^[ Yeea_d] ped[3

Select the power level by pressing the "+" or "-" key for the 
relevant hotplate. To begin with  the indicator shows"   "or "  " 

by pressing the  "+" or "-" key. Adjust up or down by pressing  
the "+" or "-" key.

If you press the "+" and "-" keys simultaneously, the power 
setting returns to"   "and the cooking zone switches off.

NB : When the "     " key is pressed, the induction hob returns 

to standby mode if no other operation is carried out 

within two minutes.

1. The boost function only operates for 5 minutes, after which 

the cooking zone will revert to its original setting. 

Cancel the "Boost" mode by pressing the "+" or "-" key of the 
corresponding zone.

Press the "+" key once increases the time by one minute ; 

hold down the "+" key increases the time by 10 minutes ;

Press the "-" key once decreases the time by one minute ;
hold down the "-" key decreases the time by 10 minutes ;

If the timer is set on more than 1 zone:

Note:

 1. When the timer is 0 minute, the timer is cancelled.

You can set the power level during the timer mode.

:

then press the " + " or " - " timer key                         power

level indicator flashing and showing "    " and the timer 
indicator flashes

To begin with the indicator shows"         ",set the time by 

pressing the "+" or "-" key. After setting the time, you can 
select the power level of the cooking zone.

Then set the time for between 1 minute and 9 hours 59 

minutes by pressing the "+" or "-" key.

When the time exceeds 1 hour, hold down the "+" key 
increases the time by 30 minutes .

When the time exceeds 2 hours, hold down the "-" key 

decreases the time by 30 minutes .

Timer can be set on all 4 cooking zones. When you set the 

time for several cooking zones simultaneously, decimal 

dots of the relevant cooking zones are on.

on the timer display will be shown the timer than will expire 

first. The dot of the corresponding zone will be on but 
flashing.Once the countdown timer expires the 

corresponding zone will be switch off. Then it will be shown 
the new first expiring timer and the corresponding zone will 
have the dot flashing.

If the timer is set but not active on any zone, it will work 
simply as timer countdown. 

2. When time elapses, the relevant cooking zone is switched 

off.

3. After setting the timer, the timing indicator has been flashing 

for 5 seconds, the set time will be automatically confirmed.

15 GB

If more than 1 zone is switched on : 

Timer function

   activate the selected zone by pushing "+" or "-" key of that 

zone,the corresponding digits will be flashing.

4. In timer mode, pressing the "+" or "-" key of the timer 

simultaneously, timer setting returns to"0", time is cancelled.

*Under normal working mode, at any power levels, the 

maximum total power of zone #1 and #2 is not higher than 

3000W.