Should you wish to reset the timer before the previous countdown has been com-
pleted, please proceed as follows: Briefl y press the Set button to stop the count-
down. Then press the Set button again and hold it pressed for three seconds. The
display will change to 00M:00S and the timer can then be set to a new setting. If
no new countdown is set within 5 seconds the Multi-Timer will return to Timer 1 (if
Timer 1 is set) or otherwise to its clock function.
Once the countdown is complete (00M:00S) an alarm signal will be emitted (a
continuous sequence of beeps) and the display will fl ash. The display will then
show the time lapse since the completion of the countdown. A minus symbol
(–00M:05S) will appear as an indicator. Cooking time can be extended if desired.
The timer will continue to run for up to 30 minutes without reactiva tion. However,
no further signal will be emitted so it is necessary to keep an eye on the cooking
from then on.
Bedien_MultiTimer.indd 26
Bedien_MultiTimer.indd 26
04.02.2010 9:30:38 Uhr
04.02.2010 9:30:38 Uhr
