F3.8
© 2016,
ROSS
CONTROLS
®
.
All Rights Reserved.
IMPORTANT NOTE:
Please read carefully and thoroughly all of the
CAUTIONS, WARNINGS
on the inside back cover.
Online Version
Rev. 11/14/16
Some customers prefer to monitor downstream
pressure in addition to using the DM
2®
or DM
1
Series
valve. A convenient way to do this is to install a pressure
switch in the extra outlet port that is provided on the
valve. The Outlet Port Pressure Monitoring kit can be
used with one of the J-Box kits above to split one of the M12 ports on the J-Box so that a pressure switch
can be wired in as well. These kits consist of one port splitter (a Tee with three M12 connectors) and one
M12-DIN cable (1 meter).
(17)
0.7
(10)
0.4
(40) 1.6
(40)
1.6
M12x1
Female
M12x1
Male
Ø0.6
GRY
PIN 2
GRN/YEL
GROUND
NOT
USED
BRN
BLUE
GRN/YEL
BRN
PIN 1
BRN
GRY
GRN/YEL
GROUND
BLK
1
BRN
3 BLK
2
GRY
1
2
3
4
Solenoid Cables
with EN connector
Status Indicator Cable
with EN connector
Solenoid Cables
with M12 Connector
4
BLACK
3
BLUE
2
3
1
4
3
BLUE
4
BLACK
Control Reliable Double Valves
with Dynamic Monitoring
DM
1
Series E & C
Preassembled Wiring Kits
Outlet Port Pressure Monitoring Wiring Kit
Kit Number
Length meters
(feet)
2251H77
1 (3.3)
Pressure switch available separately, see valve options.
3
4
5
FEMALE
A
5
1
2
3
4
5
1
2
3
4
1
2
MALE
FEMALE
B
1
3
2
4
5
PORT SPLITTER
These kits include 2 cables with either EN or M12 connectors
for the solenoids. All cables include cord grips.
Status Indicator kits
include one cable with EN
connector and a cord grip.
Solenoid Cables
with EN connector
Status Indicator Cable
with EN connector
GRY
PIN 2
GRN/YEL
GROUND
NOT USED
BRN
BLUE
GRN/YEL
BRN
PIN 1
BRN
GRY
GRN/YEL
GROUND
BLK
1
BRN
3 BLK
2
GRY
1
2
3
4
Status Indicator kit ordered separately.
Wiring Kits with J-Box
A J-Box is a junction box with a 10-pin MINI connector for connecting to the user’s control system
and (4) 5-pin M12 ports for connecting to the 3 solenoids and the status indicator on the DM
2®
Series valve. The J-Box kits include the J-Box as described above and (4) 1-meter cables for
connecting to the valve. These cables have a connector on each end. The status indicator
cable and the (3) solenoid cables have an M12 connector on one end and a EN connector on
the other end (M12-DIN).
Standard valves come with DIN type
solenoid connections, but could be
bought with M12 type connections as
well. Therefore we also offer a kit that
provides solenoid cables with an M12
connector on each end (M12-M12).
3.9 (100)
2.90 (73.6)
dia.
0.18
[4.5]
2.0
(51)
1.41
(35.9)
1.125 - 16UN2A
1.85 (46.9)
1
2
10
3
4
5
9
8
7
6
10 Pin
Pin #
Port 2
Pin #
Port 3
Pin #
Port 4
Pin #
Port 1
Pin #
1
2
3
4
5
6
7
8
9 10
(V+) 1
(V-) 2
3
4
5
6
7
8
9
10
1
1
1
1
3
3
3
3
2
2
2
2
4
4
4
4
1
1
1
1
2
2
2
2
3
3
3
3
5
5
5
5
4
4
4
4
J-Box Wiring
Kit Number
*
Connector Types
Length meters
(feet)
2249H77
M12 - DIN
1 (3.3)
2250H77
M12 - M12
1 (3.3)
*
24 volts DC only.
Wire Colors:
Orange
Blue
White w/Black
Red w/Black
Green w/Black
PIN #
1 +24 volts DC
2 Common volts DC
3 -
4 Solenoid A
5 Solenoid B
PIN #
6 -
7 Remote Reset
8 -
9 Remote Valve Fault Light
10 Remote System OK Light
Wire Colors:
Orange w/Black
Red
Green/Yellow
Black
White
1
2
10
9
6
5
4
3
7
8
10 PIN MINI Cable
These cables have a 10-pin MINI connector for connecting the J-Box kits above to the user’s control system.
Kits include one cable with connector and cord grip. Cable conductors are 18-gauge wire.
Kit Number
Length meters
(feet)
2253H77
3.66 (12)
2254H77
6.1 (20)
2255H77
9.1 (30)
2256H77
15.2 (50)
Kit Number
Solenoid Connector Type
Length
meters (feet)
2243H77
EN 175301-803 Form A
5 (16.4)
2244H77
EN 175301-803 Form A
10 (32.8)
2245H77
M12
5 (16.4)
2246H77
M12
10 (32.8)
F
F3
Status
Indicator Kits
Kit Number Length
meters (feet)
2247H77
5 (16.4)
2248H77
10 (32.8)
