Ross 9201DR-104-03, User Manual

DETOUR User Guide (v3.0)

DashBoard Menus • 23

Setup Tab

The 

Setup

 tab provides options for configuring the bypass relay, setting up the equalizer and reclocker features, 

enabling outputs, and selecting which alarms are monitored. 

Table 5.5

 outlines the menus and parameters displayed in the 

Setup

 tab.

Table 5.5  Setup Tab

Item

Parameters

Description

Relay Status

Normal

Disables the bypass relay. The input signal available on 
the SDI IN HD-BNC is used.

Bypass

Sets DETOUR into Bypass mode. The input signal 
available on the BYPASS IN HD-BNC is used.

Relay Auto Reset

Selected*

After a loss of input and when a valid input signal is 
detected on the SDI IN HD-BNC, DETOUR 
automatically switches to Normal mode.

Cleared

DETOUR continues to use the signal detected on the 
BYPASS IN HD-BNC even if a valid signal is detected 
on the SDI IN HD-BNC.

Relay Bypass on LOS

Selected*

When a valid signal is not detected on the SDI IN 
HD-BNC, the signal detected on the BYPASS IN 
HD-BNC is used.

Cleared

Disables this feature.

Relay Bypass on Lock 
Error

Selected

DETOUR automatically switches to Bypass mode when 
the SDI reclocker loses lock; or the reclocker rate is 
fixed to a different standard than is currently being 
received.

Cleared*

Disables this feature.

Bypass on Lock Error 
Hysteresis

1-100

Specifies the amount of lock loss errors per 100ms 
interval. Set the slider to 1 for very sensitive, or to 100 
for less sensitive.

Relay Bypass on USB 
Power Loss

Selected

DETOUR automatically switches to Bypass mode when 
the power from the USB connection is lost

Cleared*

Disables this feature

Failover Mode

Fast Recovery 
Mode*

DETOUR returns to normal operation once the bypass 
error condition is cleared

Standard Mode

DETOUR waits (the number of seconds set by the 
Failover Hysteresis slider) in a timeout before returning 
to normal operation

Failover Hysteresis 
(Seconds)

1-60

Specifies the number of seconds used for a timeout; 
used in conjunction with the Failover Mode options

EQ Enable

Selected*

Enables Detour to compensate for noise and signal 
losses inherent in long coaxial cable runs

Cleared

Disables this feature