background image

DETOUR User Guide (v3.0)

Introduction • 7

Introduction

This guide covers the installation, configuration, and use of the DETOUR. The following chapters are included:

• “

Introduction

” summarizes the guide and provides important terms, and conventions.

• 

Before You Begin

” provides an overview of the DETOUR features.

•  

Installation

” describes the DETOUR hardware, physical connections, and provides instructions for the basic 

physical installation of the DETOUR in your system.

• 

Configuration

” provides information on the setup requirements for the DETOUR.

• 

DashBoard Menus

” provides a brief summary of the DashBoard menus available for DETOUR.

• 

Warranty and Repair

” provides information on the warranty and repair policy for your DETOUR.

• 

Technical Specifications

”provides the technical specifications for your DETOUR.

Documentation Conventions

Special text formats are used in this guide to identify parts of the user interface, text that a user must enter, or a 
sequence of menus and sub-menus that must be followed to reach a particular command.

Interface Elements

Bold text is used to identify a user interface element such as a dialog box, menu item, or button. For example:

In the 

Edit 

dialog, click 

Apply

.

User Entered Text

Courier text is used to identify text that a user must enter. For example:

In the 

Language

 box, enter 

English

.

Referenced Guides

Italic text is used to identify the titles of referenced guides, manuals, or documents. For example:

For more information, refer to the 

DAC-9516 User Manual

.

Menu Sequences

Menu arrows are used in procedures to identify a sequence of menu items that you must follow. For example, if a 
step reads “

File

 > 

Save As

,” you would select the 

File

 menu and then select 

Save As

.

Important Instructions

Star icons are used to identify important instructions or features. For example:

Contact your IT department before connecting to your facility network to ensure that there are no conflicts. They 
will provide you with an appropriate value for the IP Address, Subnet Mask, and Gateway for your DETOUR.

Contacting Technical Support

At Ross Video, we take pride in the quality of our products, but if problems occur, help is as close as the nearest 
telephone.

Our 24-hour Hot Line service ensures you have access to technical expertise around the clock. After-sales service 
and technical support is provided directly by Ross Video personnel. During business hours (Eastern Time), 

Summary of Contents for 9201DR-104-03

































Reviews: