ACO-2200 · User Guide
• Ross Part Number: 2200DR-004-05
• Release Date: April 6, 2020.
Copyright
© 2020 Ross Video Limited. Ross®, openGear®, and any related marks are trademarks or registered trademarks of
Ross Video Ltd. All other trademarks are the property of their respective companies. PATENTS ISSUED and
PENDING. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior
written permission of Ross Video. While every precaution has been taken in the preparation of this document, Ross
Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of the information contained herein.
Patents
Patent numbers US 7,034,886; US 7,508,455; US 7,602,446; US 7,802,802 B2; US 7,834,886; US 7,914,332; US
8,307,284; US 8,407,374 B2; US 8,499,019 B2; US 8,519,949 B2; US 8,743,292 B2; GB 2,419,119 B; GB
2,447,380 B; and other patents pending.
Safety Notices
Refer to the “
Important Regulatory and Safety Notices
” document that accompanied your product.
EMC Notices
United States of America FCC Part 15
This equipment has been tested and found to comply with the limits for a class A Digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own expense.
Canada
This Class “A” digital apparatus complies with Canadian ICES-003.
Cet appariel numerique de la classe “A” est conforme a la norme NMB-003 du Canada.
Europe
This equipment is in compliance with the essential requirements and other relevant provisions of CE Directive
93/68/EEC.
Notice
— Changes or modifications to this equipment not expressly approved by Ross Video Limited
could void the user’s authority to operate this equipment.
