CrossOver 16 User Manual (v4.0)
Basic Operation • 3–3
To perform a DVE transition:
1.
Prepare a transition using
DVE
as the type
of transition, but do not perform the transition.
2.
Use the
Time
knob to change the duration of
the transition.
3.
Press
NEXT
.
4.
Use the
Effect
knob to select the DVE effect
you want to use for the transition, or press a
Wipe Pattern button.
5.
Use the
Time
knob to change the transition
duration.
6.
Press
AUTO TRANS
to perform the
transition.
Note:
• You must include the background when
performing a DVE transition on a Chroma Key,
Self Key, or Auto-Select Key. If you do not
include the background, a dissolve transition is
performed.
• Performing a DVE transition on a DVE Key
without including the background scales the
transition effect to the size of the DVE Key. This
transition does not consume an additional DVE
resource.
• Performing a DVE transition on a DVE Key with
the background included does not scale the
transition effect. This transition consumes the
second DVE resource.
For More Information on...
• preparing transitions, refer to the section
“Transition Overview” on page 3-1.
• modifying DVE transitions, refer to the section
“Modifying DVE Transitions” on page 4-2.
Media Transitions
A Media Transition allows you to use an animation
to cover a transition. When the transition starts, the
switcher plays the selected animation over top of the
background and keys that are being transitioned.
When the cut point () is reached, the switcher
performs a cut transition. It is important to use a
fullscreen image in the animation at the cut point so
that the cut is not visible on-air.
To perform a media transition:
1.
Prepare a transition using
MEDIA
as the
type of transition, but do not perform the
transition.
2.
Press
NEXT
.
3.
Press the
Browse
knob.
4.
Select the animation you want to use for the
transition. Ensure that you have already set the
cut point for this still.
5.
Press
AUTO TRANS
to perform the
transition.
Note:
• Although you can select a still image for a media
transition, it is not recommended.
• Only Auto Transition should be used for Media
transitions. Using the fader to perform the
transition manually could result in jumps in the
animation.
• The duration of the transition (
Time
) is set by the
length of the animation.
For More Information on...
• on setting a cut point for a media transition, refer
to the section “Media Transition Attributes” on
page 7-5.
• on setting up an animation for a media transition,
refer to the section “Media Transition Attributes”
on page 7-5.
Pausing a Transition
You can pause a transition while it is in progress.
Table 3.1 DVE Effect Selection
Pattern
Button
Single Press Pattern
Button DVE Effect
Double Press Pattern
Button DVE Effect
0
Push Left
Push Right
1
Push Up
Push Down
2
Squeeze Horizontal
Push Up-Right
3
Squeeze Vertical
Push Down-Left
4
Push Up-Left
Push Down-Right
5
Squeeze Up-Right
Squeeze Down-Left
6
Squeeze Up-Left
Squeeze Down-Right
7
Squeeze to Center
Fly Through
8
Circle Left
Circle Right
9
Stretch
Tumble
DVE
NEXT
AUTO
TRANS
MEDIA
NEXT
AUTO
TRANS
Summary of Contents for CrossOver 16
