CrossOver 16 User Manual (v4.0)
Advanced Operation • 4–13
8.
Press the
Device
knob to save your
selection.
9.
Press the
Confrm
knob to commit the
change. Press the
Cancel
knob to discard
the change and return to the previous setting.
Cameras
You can control the orientation, lens effects, and shot
storage and recall of an external camera.
You may experience unresponsive camera controls
for a short period of time immediately after loading
switcher settings from a USB drive, rebooting, or
performing a switcher software upgrade.
To control camera orientation:
1.
Select the input source that has been associated
with your camera.
2.
Use the
Pan
knob to pan the camera left and
right.
3.
Use the
Tilt
knob to tilt the camera up and
down
4.
Use the
Zoom
knob to zoom the camera
lens in and out.
Note:
• You can also use the positioner to control camera
pan, tilt, and zoom. This works from any camera
control menu.
To control camera focus and iris:
1.
Select the input source that has been associated
with your camera.
2.
Press
NEXT
until
Focus
is displayed.
3.
Press the
Focus
knob to toggle between
auto and manual focus modes.
4.
When in manual focus mode, use the
Focus
knob to focus the camera.
5.
Press the
Iris
knob to toggle between auto
and manual iris modes.
6.
When in manual iris mode, use the
Iris
knob
to control the lens iris size.
To store a shot:
1.
Select the input source that has been associated
with your camera.
2.
Set the camera orientation, focus, and iris
settings as required.
3.
Press
NEXT
until
Store
is displayed.
4.
Use the
Store
knob to select a shot number
to store.
5.
Press the
Store
knob to store the shot.
Note:
• The shot number defaults to the last recalled shot.
To recall a shot:
1.
Select the input source that has been assigned to
your camera.
2.
Set the camera orientation, focus, and iris
settings as required.
3.
Press
NEXT
until
Recall
is displayed.
4.
Use the
Recall
knob to select a shot number
to recall.
5.
Press the
Recall
knob to recall the shot.
Note:
• You can not recall a second shot while a shot is
being recalled. Wait for the first recall to finish
before attempting to recall another shot.
• The shot number defaults to the last recalled shot.
• When you store a memory register, the last
recalled shot is stored in the memory register and
is recalled when the memory register is recalled.
For More Information on...
• storing and recalling memory registers, refer to the
section “Memory System Overview” on page 6-1.
Inverting Camera Axes
You can selectively invert the camera pan and tilt
axes on a per-input basis.
To invert camera axes:
1.
Press
MENU
.
2.
Press the
CONFIG
Wipe Pattern button.
3.
Press the
Input
knob to display the
Input
menu.
4.
Use the
Input
knob to select the input that
the camera is assigned to.
5.
Press
NEXT
until
Device
is displayed.
6.
Press the
Device
knob to display the
Device
menu.
NEXT
NEXT
NEXT
MENU
NEXT
Summary of Contents for CrossOver 16
