FDR-9647-ST, FDT-9648-ST, and FDB-9649-ST User Guide (v3.0)
Before You Begin • 9
Before You Begin
If you have questions pertaining to the operation of your GearLite module, contact us at the numbers listed in the
section
” on page 8. Our technical staff is always available for consultation,
training, or service.
Overview
The Dual Channel Fiber Receivers/Transmitters are high-quality signal conversion solutions within the family of
GearLite compact, self-contained modular products.
A universal power adapter and line cord, suitable for the country of use, is supplied with each module. Various
mounting options are included that enable a wide range of installation choices.
There are four connections on each module, the designation of each is dependent on the module you are using.
Features
Each module includes the following standard features:
• Supports major SDI formats up to 1080p 60Hz
• Supports DVB-ASI (EN 50083-9)
• Supports single-mode fiber
• Re-clocking on all outputs at 270Mbps, 1.483Gbps, 1.485Gbps, 2.967Gbps, and 2.970Gbps
• Input status indicator LEDs
• Small brick form factor
• 5V universal adapter with locking DC connector
• 3-year warranty
FDR-9647-ST Features
In addition to the standard features, the FDR-9647-ST also includes:
• Two BNC jacks for SDI outputs
• Two LC/UPC PIN connectors for fiber optic inputs
FDT-9648-ST Features
In addition to the standard features, the FDT-9648-ST also includes:
• Two BNC jacks for SDI inputs
• Two LC/UPC PIN connectors for fiber optic outputs
FDB-9649-ST Features
In addition to the standard features, the FDB-9649-ST also includes:
• One BNC jack for an SDI input
• One BNC jack for an SDI output
• One LC/UPC PIN connector for fiber optic input
• One LC/UPC PIN connector for fiber optic output
