18 • Hardware Overview
MUX-8258 Series User Guide (v9.0)
Cabling for the MUX-8258-B
The MUX-8258-B accommodates eight synchronous AES audio input streams at 48kHz or any asynchronous AES
streams from 32kHz to 96kHz with SRC enabled. Note that SRC should only be used with Pulse Code Modulation
(PCM) digital audio and not any form of compressed signal, such as Dolby®.
When installing the MUX-8258-B:
•
DFR-8310 series frame
— The
8310AR-034
Rear Module is required. Each rear module occupies one slot and
accommodates one card. This rear module provides one SDI input, one SDI output and eight balanced AES
inputs. (
The MUX-8258-B is not compatible with the DFR-8310-BNC frames.
•
DFR-8320
,
OG3-FR.
and
OGX-FR series frame
s — The
8320AR-034
Full Rear Module is required.Each rear
module occupies two slots and accommodates one card. This rear module provides one SDI input, one SDI
output, and eight balanced AES inputs. (
)
Cabling for the MUX-8258-4C
When installing the MUX-8258-4C:
•
DFR-8310 series frame
— The
8310AR-034
Rear Module is required. Each rear module occupies one slot and
accommodates one card. This rear module provides one SDI input, one SDI output and four analog inputs.
(
The MUX-8258-4C is not compatible with the DFR-8310-BNC frames.
•
DFR-8320
,
OG3-FR.
and
OGX-FR series frame
s — The
8320AR-034
Full Rear Module is required. Each rear
module occupies two slots and accommodates one card. This rear module provides one SDI input, one SDI
output, and four analog inputs. (
)
Figure 1.4 Cable Connections for the MUX-8258-B
SDI In
SDI Out
AES 1 In
AES 5 In
AES 6 In
AES 7 In
AES 8 In
AES 2 In
AES 3 In
AES 4 In
Summary of Contents for MUX-8258 Series
