28 • Operation
DSS-8224 User Guide (v6.0)
displays a 7x1 configuration where two DSS-8224 cards are used. You must have two DSS-8224 cards
with one configured as the Master. The Master card must be enabled for 7x1 operation.
Figure 6.3 Example of Signal Flow with 7x1 Operation — Two DSS-8224
displays a 7x1 configuration where two DSS-8224 cards and two AVS-8764 cards are used. Note that
you must have one DSS-8224 card configured as the Master. This Master card must be enabled for 7x1 operation.
One of the AVS-8764 cards must also be enabled for 7x1 operation.
Figure 6.4 Example of Signal Flow with 7x1 Operation — Two DSS-8224 and Two AVS-8764
Cable Length Requirements
Keep the following in mind to ensure proper communication between the remote panel and the utility switch:
• Maximum coax length should not exceed 1200ft.
• If you are using audio/control cable to connect the panel to the utility switch, do not exceed 400tt.
• If you are controlling multiple cards with one panel, keep the slave cards as close as possible (i.e. less than 60ft)
to the master card.
*Card is configured for 7x1 operation
*Card is configured for 7x1 operation
Summary of Contents for OpenGear DSS-8224
