SAFETY WARNING!!!
READ AND UNDERSTAND ALL OF THE OPERATING INSTRUCTIONS, SAFETY
PRECAUTIONS AND WARNINGS IN THE INSTRUCTION MANUAL BEFORE OPERATING OR
MAINTAINING THIS NAILER.
Most accidents that result from the operation and maintenance of Nailers are caused by the failure to observe basic
safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it
occurs, and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identified by DANGERS and
WARNINGS on the Nailer and in this Instruction Manual.
EMPLOYERS RESPONSIBILITY
1. Ensure that this INSTRUCTION MANUAL is available to operators and personnel performing maintenance.
2. Ensure that Nailers are used only when operators and others in work area are wearing protective equipment.
3. Enforce the use of protective equipment by operators and others in work area.
4. Keep Nailers in safe working order.
5. Maintain Nailers properly.
6. Ensure that Nailers that require repair are not used before they are repair.
SAVE THIS MANUAL AND KEEP IT AVAILABLE FOR OTHERS!
SPECIFICATIONS
Nail capacity (Qty): 90 pcs
Nail size: 20mm (3/4”) to 50mm (2”) 16 Gauge finishing nails
Recommended operating pressure: 4-7 bar (60 -100 PSI)
Maximum pressure: 8.3 bar (120 PSI)
Air inlet: Nitto style connector
Dimensions: 80 x 280 x 303mm
Weight: 2.3 kg
SAFETY
1.
ALWAYS WEAR EYE PROTECTION.
When operating the Nailer, always wear eye protection, and
make sure others in work area wear eye protection. Eye protection must conform to the requirements of
Australian Standards and provide protection against flying particles both from the front and side. The employer
must enforce the use of eye protection by the nailer operator and others in work area.
2.
STAY ALERT.
Watch what you are doing, and use common sense when operating a power Nailer. Do not
use Nailer while tired or under the influence of drugs, alcohol, or medication, A moment of inattention while
operating power Nailers may result in serious personal injury.
3.
NEVER USE BOTTLED GASES.
Never use oxygen, combustible gases or any other bottled gases as
a power source for the nailer. Use of the above gases is dangerous, as the Nailer will explode. Use only clean,
dry, regulated compressed air.
