Option
Value
Row
Select the panel row that
you want to assign the
SideBoxNet to. The panel
row corresponds to the
SideStick or SideBoxNet in
that the module assigned
to row 1 is numbered 1 in
the menus (SideStick1 for
example). You can only
assign the SideStick to an
internal panel row.
First Fader
Assigns the number, or
position, of the first audio
slider on the SideSlideNet
module. Each audio
module has 8 sliders, so
the first slider on module
1 is 1, the first slider on
module 2 is 9, and so on.
8.
Press
HOME
>
Confirm
.
Replacing a SideBox Module
Important:
Contact Ross Video Technical Support
before attempting to replace a module with a
different type of module. Some modules are not
compatible.
To Remove a Module
1.
Disconnect all power and communications cables
connected to SideBox.
2.
Remove the 14 screws from the front, back, and
sides of the SideBox.
Figure 8: Removing Screws
3.
Slowly lift the SideBox top out of the SideBox
base until you can access the internal cables.
4.
Disconnect both of the module control link cables
and the power cable from the module.
Figure 9: Disconnecting Internal Cables
5.
Remove the 4 retaining nuts that secure the
module onto the module mounting plate.
Figure 10: Removing Module
5
