Printed in Canada.
4
1.
Remove the failed Cooling Fan Module as outlined in “
To remove the Cooling Fan Module from the
Figure 5
Location of Micro SD Card Slot — Between the Fan and the Fan Board
2.
Locate the Micro SD card slot inside the failed Cooling Fan Module. (
)
3.
Gently press in on the Micro SD card so that it pops out from the slot.
4.
Make a note of the orientation of the card in its slot. This will help with installing the Micro SD card into the
new Cooling Fan Module.
5.
Gently pull the Micro SD card out.
To install the Micro SD card into the new Cooling Fan Module
1.
Locate the Micro SD card slot inside the new Cooling Fan Module. (
2.
Orient the Micro SD card so that the printed side faces the fan and the print is upside down. (
)
Figure 6
Positioning the Micro SD Card
3.
Carefully insert the Micro SD card into the slot.
The Micro SD card makes a faint clicking sound when it is fully inserted.
simssd
simssd
