AC-525 Hardware Settings
5.
AC-525 Hardware Settings
Each AC-525 panel controls an entrance. The behavior of the panel is
controlled by Dipswitch settings.
Select the appropriate Dipswitch setting to operate the panel as either a
single door, a double door, or four doors. See below Access Control Panel
Type, page 31.
Access control panels configured as either single door or double door
controllers have two readers, IN or OUT. Access control panels configured
with the MD-D02 expansion as either double door or four-door controllers
have four readers.
Single Door:
Outputs
Door Lock output
(OUT 1)
General purpose output
(OUT 1A)
General purpose output
(OUT 2)
General purpose output
(OUT 2A)
Inputs
Request to exit
(IN 1)
Door monitor input
(IN 1A)
General purpose input
(IN 2)
General purpose input
(IN 2A)
Readers
Reader1 (IN/OUT)
Reader2 (IN/OUT)
Double door:
Outputs
Door1 Lock output
(OUT 1)
General purpose output
(OUT 1A)
Door2 Lock output
(OUT 2)
General purpose output
(OUT 2A)
Inputs
Door1 Request to exit
(IN 1)
Door1 monitor input
(IN 1A)
Door2 Request to exit
(IN 2)
Door2 monitor input
(IN 2A)
Readers
Reader1 (Door1
IN/OUT)
Reader2 (Door2
IN/OUT)
Double door with 4 readers (MD-D02):
Outputs
Door1 Lock output
(OUT 1)
General purpose output
(OUT 1A)
General purpose output
(OUT 2)
AC-525 Hardware Installation and User Guide
Page 28
