Rossle BIBER 22 BRUSH, Operating Instructions Manual

T e c h n o l o g y   f o r   c l e a n   p o n d s

Working with the BIBER 22 BRUSH

The BIBER 22 BRUSH is designed to clean surfaces under water. Particularly on even wall and floor sur-

faces, the rotating brush is automatically drawn to the surface, which improves the cleaning ability and 

generally makes it easier for the user to work with less effort. It is not necessary to use strong pressure, 

which could damage the driving gears. With the BIBER 22 BRUSH it is possible to attach a suction hose 

with a diameter of 50 or 38 mm to the built-in suction connector. If using the suction possibility at the 

same time, the dirt can be removed through the slits in the brush and the clarity of the water is main-

tained. A clouding of the water is for the most part avoided. Using the speed control unit, you have the 

possibility to choose between three different speeds in each direction. The rotation speed you choose is 

indicated by an LED light. 

For the wall surfaces we recommend a faster, for the horizontal surfa-

ces a rather slower rotation speed. In order to avoid damaging sensitive 

surfaces like foil, we recommend starting with the yellow Vacu-grip brush 

attachment. As an option, you can, however use the harder Vacu-grip 

brushes in red = medium hard or green/red = hard. In the case of hard or 

encrusted dirt we recommend the Clearpad. The loaded power unit can be 

easily transported using the strap provided, just clip the power unit into 

the power unit holder.  The BIBER 22 BRUSH can now be steered by the 

telescopic rod and the cleaning of the surfaces in the pool or pond will be systematically carried out. 

Changing the Vacu-grip brush

Attention! Before carrying out any maintenance work on the BIBER 22 BRUSH, please disconnect the 

brush from the power supply.

You can change the brushes easily using the brush lifter (1). Place the brush lifter into the slot (2) which 

is indicated with an arrow (3). Lift the brush up and out (4) and pull the brush away from the driving unit. 

To mount the brush, just set the arrow onto a slot and then press down hard until it locks into place.

Special accessories

The dirt-save is an additional brush 

ring which, when clicked onto the 

beaver head, remains in place. This 

significantly reduces dirt drifting off 

during cleaning. The view through 

the water onto the pond wall is re-

tained. The dirt is sucked off through 

the slots in the Vacu-grip brush.

Speedcontrol 

12