background image

ROSSMA IIOT-AMS TILT COUNTER/ 

OPERATION MANUAL 

 

1

st

 revision 13.01.2020 .  

4

 

 

1.

 

DESCRIPTION AND OPERATION PRINCIPLE

 

 

SWITCHING DEVICE DESCRIPTION 

Switching  device  ROSSMA  IIOT-AMS  Tilt  Counter  registers  the  slope  of  the  switching  device 

casing to an angle more than 15 degrees and performs slope counting.  

The composition has two sensitive elements for slope recording. 

The  switching  device  can  be  used  in  industrial  enterprises,  infrastructure  of  housing  and 

communal  facilities,  in  hard-to-reach  places  (wells,  basements).  The  switching  device  gives  a 

possibility  to  install  control  measuring  instruments  in  places  with  no  power  supply,  operates 

indifficult climatic and weather conditions.. 

 

The switching deviceis delivered with a 3.6 V power supply. The power cell of the ROSSMA IIOT-

AMS  TILT  COUNTER  switching  device  is  a  built-in  battery  with  a  capacity  of 

1200/6000/9000/14000/19000/20000 mAh, designed for a service life of up to 10 years when 

counting readings and transmitting data once a day. 

 

 

 

DATA COLLECTION AND TRANSMISSION ALGORITHM 

Counting and summing of casing tilts number is performed constantly. The package with the 

counted data is transmitted in wireless network with 1 minute  period (it is not recommended 

to set the measurement frequency to less than 1 minute to ensure a long non-volatile mode of 

operation). The read data are stored in the switching device memory.  

Data transmission period is configured by special commands in wireless network. By default, 

the manufacturer sets the data transmission discreteness to 1 time per 15 minutes. The data is 

transmitted according to the specified timer, which is installed in the internal memory of the 

switching device. 

The switching device is powered by a built-in 3.6В power supply. 20A/h cell capacity designed 

for 10 years 

ROSSMA  IIOT-AMS  TILT  COUNTER  switching  device  provides  on-board 

power  capability,  allowing  installation  in  hard-to-reach  locations.  It  is  also 
possible to connect an external power supply. 

WARNING

: The switching device is equipped with a built-in power cell - a 

non-rechargeable lithium-thionyl chloride (LiSOCL2) battery. 

Attempts to 

charge the battery can cause fire! 

 

Summary of Contents for IIOT-AMS Tilt Counter














Reviews: