Rossofuoco RUBINO, User And Maintenance Manual

Please, read carefully the entire instruction manual.

Loanding and firing up:

1. 

open the front door of the base;

2. 

extract the burner;

3. 

load the burner with the desired and allowed quantity of pellet. In the following schedule 

there is the help for the correct quantity of pellet;

HOW TO LOAD, FIRE UP, UNLOAD AND 

RELOAD THE HEATER

KG PELLET

FLAME DURATION

3 kg.

about 1,5 hours

4 kg.

about 2 hours

5 kg.

about 2,5 hours

6 kg.

about 3,5 hours

7 kg.

about 4,5 hours

4. 

to fire up the Heater you have to use 2/3 pieces of an ecological firelighter and fire them up 

(the use of inappropriate firelighter can provoke the malfunction of the system);

5. 

You make sure that the combustion has started so put the flame-reducer on the burner. 

During the ignition you should be ensured that everything is equipped properly for the 

correct functioning;

6. 

Reinsert the burner inside the base of the Heater and lock the door. Put the key in a safe place;

It will be necessary to wait for 10 minutes before that the flame starts to come out from the glass 

tube (mod. RUBINO) or inside the area surrounded by the glasses (DIAMANTE).

Especially on the occasion of the first ignition or of those immediately following it is considered normal 

the emission of whitish fumes and odors; this can be also repeated, but gradually less intense, for some 

times, but it is normal in the first heating of a new product.

Discharge  at end combustion:

7. 

Open the front door of the base element;

8. 

Wearing the appropriated fireproof mitts remove the cover of the collecting drawer 

underlying the brazier;

9. 

Keep wearing the fireproof mitts and open the brazier at its bottom end in order to discharge 

the combustion residual in the drawer;

10.  Clean the inside of the breazier, using the poker if necessary, removing any residual pellets 

even if still burning.;

11. 

please check that the edges and the lower door are clean so to have a perfect closing; then 

close it;

12. 

close the drawer with its cover;

Empty out the drawer only if you are sure that the combustion material does not  glow or burn 

anymore. For the disposal of combustion residuals all local legislative regulations have to be 

respected. 

Now, after the first ignition and subsequent cleaning, the heater is ready for normal use.

page 09