USER'S AND
MAINTENANCE
MANUAL
Date:
01/31/2020
Code
MAN D185T4F-DB
ENG
Air Compressor : D185T4F-DB
Revision 03
Copyright © 2014, ROTAIR S.P.A. - All rights reserved
.
This manual is intellectual property of ROTAIR S.P.A.
Its full or partial reproduction is forbidden under any form, on any support and by any means, without the
written authorization by ROTAIR S.P.A.
Page
22/59
6.3 Safety recommendations concerning maintenance
In order to perform the maintenance operations in safe conditions, the following provisions need to be
complied with:
1)
The control and maintenance operations need to be performed by specialized qualified personnel aware of
the
recommendat
ions shown in this manual. "Specialized qualified personnel" means people with the
appropriate
educational background and whose level of skills is appropriate to the kind of intervention
and
who have
acquired experience and instructions on accident prevention and on the procedures
required
to
perform
maintenance operations
2)
A
ll
of t
he maintenance activities need to be performed after a safe stop of the machine and
an
interrupti
on
of
the
power
supply to
the engine
3)
I
f the machinery is stopped during the maintenance and repair operations, it must be protected against
accidental restart
4)
I
f replacement
parts
are needed
, the
y
must be ordered at
ELGi
customer service and
must
correspond to
the technical standards defined by R
OTAIR
5)
T
he electrical equipment of the machinery must be periodically inspected. Any component’s
faults must be
immediately pointed out and replaced after careful assessment of their effectiveness and efficiency
6)
K
eep the greatest possible clean
li
ness during the maintenance operations, avoiding using
flammable
solvents
7)
B
efore restarting the machinery after maintenance or overhaul, make sure that all
of
the guards and
safety
devices are restored and operational
8)
N
ever use water to extinguish the flames in case of fire (Figure 6.5-1)
DO NOT USE WATER TO
EXTINGUISH FIRES HERE
Figure 6.5-1
After performing any maintenance operations, it is mandatory to restore all protective devices,
particularly in the area of the cooling fan or other moving parts
