22
-- 6) MACHINE HANDLING AND PARKING --
-- 6.1) LIFTING INSTRUCTIONS
(Fig. 4) --
The bodywork has a special opening protected by a rubber covering, making it
possible to easily reach the lifting hook, without lifting the bonnet.
A lifting clevis is supplied for this purpose together with the compressor.
a) Check that the lifting parts (crane, hoist etc) have the capacity to move the
weight of the unit (see par. 2). If the crane is positioned on the vehicle, position the
lateral anti-tilting stabilizers.
b) Hitch the clevis and the rope (fig. 4) to the hook of the lifting means.
c) Gently and smoothly lift the unit.
d) Avoid making the machine sway during lateral movement.
The machine user must periodically check the state of efficiency of the lifting
equipment described above, and must immediately replace it when it is no longer
safe. No other hitching and lifting systems are permitted except those fitted on the
machine.
FIG.4
Summary of Contents for MDVN 71 AP
Page 2: ...2...