38
-- 10.7) BRAKING DEVICE CHECK --
As concerns this operation consult the use and maintenance manual relative to
the axial - brake - overrun, compiled by the manufacturer and which forms part of the
documentation supplied together with the machine.
-- 10.8) WHEEL BLOCKING SCREW CHECK --
Using a special spanner ensure that there are no loose screws. Check.
-- 10.9) COMPRESSOR OIL FILTER REPLACEMENT
(Fig. 19 --
Use a chain pipe wrench to unscrew
the filter to be replaced (part A ).
Oil the seal of the new filter which must
be tightened and secured
by hand
only.
Start up the machine and ensure that
there is no leakage near the seal; if
there is; switch off the machine and
check the condition of the machine
and that it is correctly positioned in its
slot.
FIG. 19
WARNING:
The old filter is impregnated with polluted and harmful mineral oil. It
must therefore be sent to the special collection centres.
A
Summary of Contents for MDVN 71 AP
Page 2: ...2...