7
“
Conforming use
" presupposes the observance of the following regulations
concerning the use, maintenance and transport of the unit itself.
It is also necessary to ensure that all the accident prevention regulations hereby
described are followed, also in accordance with general safety regulations as indicated in
the current legislation.
The constructor declines any responsibility in the event of any modifications
made to the machine without its authorization.
The machine is supplied complete with the following documents:
1) - General use and maintenance booklet;
2) - Motor use and maintenance booklet;
3) - Declaration of machine conformity to the R.E.S. of EEC directive 89/392;
4) - Conformity certificate of the oil separator tank;
5) - Certificate of homologation for road circulation (should this have been envisaged and
requested in the sales contract);
6) - Instructions booklet for the axle and the drawbar;
7) - Certificate of conformity of the safety valves of the oil separator tank;
8) - Motor guarantee certificate;
9) - Compressor guarantee certificate.
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
-- 4) ENVISAGED MACHINE USE --
The
MDVN
motor-driven compressor is a machine which generated a well-
defined quantity of compressed air measures in litres per minute.
There are many field of application for the use of all those tools, accessories
and implements which have a "
pneumatic
" function such as demolition hammers,
perforation hammers, vibrators, drills, starters, compactors, plasterers, etc...
Each instrument has a compressed air consumption measured in litres per
minute.
The best ratio between compressor and tool is when the compressed air
consumption of this last does not exceed 85% of the air generated by the compressor
(also bear in mind that the quantity of compressed air requested by the tool, will increase
in proportion to the wear of the tool itself).
A correct compressor-tool ratio will ensure that the machine operates efficiently
and will guarantee maximum performance.
If the tool is too big it will jeopardize the correct function of the machine, and its
performance will be impaired, not having the necessary amount of compressed air.
This machine has been designed to work at an environmental temperature of
between
-10
and
+40
C
.
The compressed air generated by this unit contains minute traces of oil and it is
therefore not suited to use in those systems that require totally oil-free air (i.e. food
industry, pharmaceutical industry, flour and powder transport, etc...).
COUNTER-INDICATIONS
Summary of Contents for MDVN 71 AP
Page 2: ...2...
