19
Access Code Timeouts:
When in menu mode, if no key activity is detected for a period of time the display will automatically reset to
the normal operational display; Page 0. The timeout period is dependant on the access code used:
User:
1 minute
Menu Mode Navigation:
In menu mode the Display Field will flash and show the Page number. To select a page press UP or DOWN.
For each page the Item and Value field will display the first Item of the page list. To view a page list press
ENTER, the Page number will stop flashing and the Item display will flash. Press UP or DOWN to view the
selected page list items. To select an Item value for modification press ENTER, the Item display will stop
flashing and the Value display will flash. The value or option can now be modified by pressing UP(Plus) or
DOWN(Minus). To enter a modified value or option in memory press ENTER; alternatively the modification
can be abandoned, and the original setting maintained, by pressing ESCAPE.
Page 3
Page 2
Page 1
Item 1
Value
Item 2
Value
Item 3
Value
Item 4
Value
Item 5
Value
Page 0
Item 1
Value
Item 2
Value
Item 3
Value
Item 4
Value
Item 5
Value
Item 6
Value
Page 5
Page 4
Press ESCAPE at any time in menu mode to step backwards one stage in the navigation process. Pressing
ESCAPE when the page number is flashing will exit menu mode and return the display to normal operational
mode; page 0.
Page 3
Page 2
Page 1
Item 1
Value
Item 2
Value
Item 3
Value
Item 4
Value
Item 5
Value
Page 0
Item 1
Value
Item 2
Value
Item 3
Value
Item 4
Value
Item 5
Value
Item 6
Value
Page 5
Page 4
Press and hold RESET for two seconds at any time to immediately exit menu mode and return to the
normal operational mode display. Any value or option adjustment that has not been confirmed and entered
into memory will be abandoned and the original setting maintained.
A flashing Key symbol displayed with any Item indicates the Item is locked and cannot be modified.
This will occur if the Item is view only (non adjustable) or in instances where the item cannot be adjusted
while the compressor is in the operational STARTED state.
