30
-- 12.5) FILTERING CLOTH REPLACEMENT IN OIL SEPARATOR TANK --
WARNING! These operations must be
undertaken only after having brought the
machine to a standstill and disconnected the
electricity supply!
After checking that the inside of the tank has been
fully depressurised, empty out the oil contained
inside using the special tap (see paragraph on
compressor oil replacement).
Now, loosen the flange of the oil separator tank
(part. 1 fig.7).
Unscrew the filter (part. 2 fig. 8) using a 62 mm
spanner and extract it from the tank.
Now re-secure the filter reassembled in this way
(fig. 8), close the flange again (fig. 7) and pour a
sufficient quantity of oil into the tank (see paragraph
entitled compressor oil replacement), checking to
ensure there is no oil leakage from the flange.
Fig.7
1
Fig.8
2
