Basic safety instructions
13
•
The machine may only be operated, serviced and inspected by qualified and
authorised personnel who have read the operating manual and perform their
work accordingly.
•
Only operate the machine in technically flawless and functional condition.
•
If damage is detected, immediately switch off the machine, attach a sign in-
forming others that switching back on is prohibited and then inform your su-
pervisor.
•
Maintain the cleanliness of the machine and its surroundings.
•
Wear personal protective equipment.
3.7
Safety instructions in regard to specific energy systems
3.7.1
Electrical system
The machine is equipped with an electrical system that operates with high volt-
age.
•
Prior to beginning work, inspect the electrical system for visible signs of dam-
age. Immediately replace damaged components.
•
Before performing maintenance work, switch off the current to the electrical
system and prevent it from being accidentally switched back on.
•
Always keep the control boxes closed.
•
Lay lines so that they do not pose a stumbling hazard and so that damage
due to falling objects, pinching or abrasion is avoided.
•
Do not lay lines around moving components and ensure that the lines cannot
catch on any moving components.
•
Protect the electrical system from penetration by water or other liquids.
•
Regularly inspect lines, especially after maintenance work, for secure fit.
3.7.2
Hydraulic system
Hydraulic oil, lubricants and other substances, such as solvents or cleansers, can
lead to irritation of the skin, eyes or respiratory tract. These also pose a hazard
to the environment.
•
Observe the safety instructions of the manufacturer.
•
Use personal protective equipment.
•
Use a breathing protection mask if necessary.
•
Avoid contact with the skin. Should contact with skin arise, wash thoroughly.
•
In the event of contact with eyes, rinse and consult a physician.
•
Ensure that no substances contaminate the ground or enter the sewer sys-
tem.
•
Dispose of hydraulic oil, lubricants and cleansers in accordance with environ-
mental regulations.
3.7.3
Mechanical system
When using and working on the machine, mechanical hazards are present.
These hazards are posed in the area of the mechanics underneath the platform.
Summary of Contents for ML40
