Shutting down
28
8
Shutting down
WARNING
High electrical voltage
Severe injury or death from electrical shock
•
Only trained electricians may work on the electrical system.
8.1
Temporary shutdown
Shutting down at the end of a work shift
X
Lower the platform completely.
X
Turn the main switch to "0".
Shutting down for storage
X
Lower the platform completely.
X
Disconnect the machine from the mains electricity supply.
X
Clean the machine (
Chap. 9.3 "Cleaning the machine", page 30
X
Transport it to the storage site (
).
X
Carry out corrosion protection measures appropriate for the storage condi-
tions and length of time to be stored.
X
When putting the machine back into operation, perform commissioning and
an additional inspection (Chap. 6 "Starting up", page 22, Chap. 9.6.2 "Addi-
tional inspections", page 37).
8.2
Permanent shutdown
The handling and disposal of mineral-based oils is subject to legal regulations.
Bring used oil to an authorised collection point. For more information, contact the
responsible administrative offices. Take care not to spill any hydraulic oil. Take
measures to prevent spills of hydraulic oil (oil-tight tarp, catch pan).
Proceed as follows:
X
Clean the machine of coarse dirt.
X
Lower the platform completely.
X
Disconnect the machine from the mains electricity supply.
The machine can now be transported (Chap. 4, page18).
Summary of Contents for ML40
