background image

Trained Operators and Regular Maintenance Ensures 

Satisfactory Performance of Your Rotary Lift.

Replacement Parts:  See installers package for parts breakdown sheet.  Order 

Genuine Rotary replacement parts from your nearest Authorized Parts 

Distributor.

Maintenance Assistance:  Contact your local Rotary distributor.

Should further assistance be required, contact Rotary Lift, at one of the phone 

numbers listed below.

Certificate of Compliance

Rotary Lift is authorized to apply ETL & cETL Listing 

Marks/Labels to this AC Motor.  Authorization:  ETL Report No. 

J98007541-003, FAM.  This ETL test certifies that this AC Motor 

complies with Underwriters Laboratories, Inc. standard 

ANSI/UL 201 & CSA standard C22.2 No. 68.

SV0021  B Rev. 5/2/14

 

© Rotary

®

, Printed in U.S.A., All Rights

Reserved.  Unless otherwise indicated, 

ROTARY, DOVER and all other trademarks are property of Dover Corporation and its affiliates.

Rotary World Headquarters

2700 Lanier Drive

Madison, IN 47250, USA

www.rotarylift.com

North America Contact Information

  Tech. Support:  p  800.445.5438

  

  f  800.578.5438

  

  e  userlink@rotarylift.com

  Sales:  p  800.640.5438

  

  f  800.578.5438

  

  e  userlink@rotarylift.com

World Wide Contact Information

World Headquarters/USA: 1.812.273.1622

Canada: 1.905.812.9920

European Headquarters/Germany: +49.771.9233.0

United Kingdom: +44.178.747.7711

Australasia: +60.3.7660.0285

Latin America / Caribbean: +54.3488.431.608

Middle East / Northern Africa: +49.771.9233.0

Summary of Contents for SPOA7 Series













Reviews: