Umbauanleitung/retrofit instruction 125 MAX Series
Notice:
Check that the circlip is correctly seated in the piston groove!
Fig. 32 (K00028, K00336)
5.1.2) Cylinder
Position new cylinder base gasket (0.5 mm).
Coat cylinder bore and piston (2) with engine oil.
Press piston ring into the piston with two fingers.
Install the cylinder (1).
Notice:
Do not damage the gasket!
Fig. 33 (K00337)
Screw cylinder crosswise to the crankcase with the 4 collar nuts.
Tightening torque 24 Nm (18 ft.lb).
1
2
Seite/page 49/59
Ausgabe/Edition 09/2014
Summary of Contents for 125 Max
Page 61: ......
