d0
45
2
7
.f
m
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 914 Series
Edition 2 / Rev. 0
05-50-00
page 13
January 01/2010
3.5)
Exceeding the max. permissible oil temperature
General note
NOTES:
Any exceeding of the max. admissible oil temperature
must be entered by the pilot into the engine log book, stat-
ing duration extant of excessive temperature and pertinent
detail.
Graphic
Overview and proceed;
Fig. 3
07140
Exceeding up to
max. 160 °C
(320 °F)
Table 3.
WARNUNG
NOTICE
If the max. permissible oil temperature is exceeded,
other limits are often exceeded, too, e.g. the cylinder
head temperature. Please observe the relevant in-
structions.
160 °C
(320 °F)
0
15 min.
Time
Proceed as
instructed in
table 3
Proceed as instructed
in table 4
Operating limit
(See Operators Manual 914 Series)
Excess temperature up to max. 160 °C (320 °F) max. 15 min.
Step
Procedure
1
The whole oil system must be inspected, repaired or overhauled in accor-
dance with the BRP-Powertrain instructions for continued airworthiness.
2
Inspect oil level in the oil tank.
3
Inspect oil cooler for contamination and check the entire oil circuit for correct
functioning.
4
Check that oil lines are routed correctly and undamaged.
5
Cut oil filter housing and inspect filter mat for foreign matter.
6
Carry out oil change.
7
Inspect all further systems for correct functioning.
Summary of Contents for 914 series
Page 183: ......
