d0
45
27.
fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 914 Series
Edition 2 / Rev. 0
05-50-00
page 18
January 01/2010
longer than 5 hr.
If the engine has been operated
longer than 5 hours
with engine oil not
corresponding with specification in the Operators Manual the following
work is required.
Oil specification not respected
Step
Procedure
1
Remove propeller gearbox.
2
The gearbox must be inspected, repaired or overhauled in accordance with
the BRP-Powertrain instructions for continued airworthiness.
3
Carry out detailed inspection of the affected engine components.
4
Oil change.
5
Remove the lowest positioned banjo screw (1) (banjo bolt, plug screw or
screw socket) and drain the remaining oil from the crankcase. Screw in banjo
bolt or plug screw.
Tightening torque see Installation Manual 914 Series.
6
Replace oil filter.
7
Drain oil completely from oil cooler.
8
Drain oil from oil tank.
9
Refill oil tank with oil as specified, refer to Operators Manual.
10
Purge air from oil system. See chap. 12-20-00, section:
11
Run engine for approx. 1 hour and replace oil and oil filter once more, as stat-
ed above.
Summary of Contents for 914 series
Page 183: ......