BRP-Rotax
INSTALLATION MANUAL
Vent socket
Interface Parameter
Value
Outside diameter
8 mm (0.31 in.)
Slip–on length
15 mm (0.59 in.)
m
WARNING
In any case the vent socket must ensure a release of pressure from the oil tank at
any time. Otherwise oil could emerge into the turbo housing which conveys
through the exhaust. Formation of smoke is possible.
Oil tank inlet (tur-
bo charger)
Interface Parameter
Value
Screw socket
3/4–16 UNF
Tightening torque
25 Nm (18 ft. lb)
OIL PUMP
Oil pump inlet
The oil pump inlet must be connected directly with the oil tank outlet.
Interface Parameter
Value
Screw socket
3/4–16 UNF
Tightening torque
25 Nm (18 ft. lb)
Oil return outlet
The oil return outlet must be connected directly with the oil tank inlet.
Page 8
December 01 2017
Effectivity: 915 i A Series
Edition 0/Rev. 0
Summary of Contents for 915 iS 3 A
Page 165: ......
