BRP-Rotax
INSTALLATION MANUAL
INSTRUCTION
Engines require instructions regarding their installation, application, use, operation, main-
tenance and repair.
Technical documentation and regulations are useful and necessary complementary ele-
ments for trainings, but can by no means substitute for theoretical and practical
instructions.
These instructions should cover explanation of the technical context, advice for operation,
maintenance, installation, use and operational safety of the engine.
Safety notice
In this technical Manual passages concerning safety are especially marked. Pass on
safety warnings to other users!
Accessories
This engine must only be operated with accessories supplied, recommended and re-
leased by BRP-Rotax. Modifications are only allowed after consent of the engine
manufacturer.
Spare parts
See Illustrated Parts Catalog, latest issue.
ATTENTION
Only use genuine ROTAX® spare parts
Spare parts must meet the requirements defined by the engine manufacturer.This can
only be guaranteed when using GENUINE-ROTAX®-spare parts and/or accessories
(see IPC). Spare parts are available at ROTAX® Authorized Distributors and their inde-
pendent Service Centers. Any warranty by BRP-Rotax will become void if other spare
parts and or accessories than GENUINE-ROTAX®-spare parts and/or accessories are
used (see latest Warranty Conditions).
Standard tools /
Special tools
ATTENTION
Only use tools and appliances which are suitable for the relevant task according
to the latest Manuals.
State of delivery
m
WARNING
Engine and gearbox are delivered in “dry“ conditions (without fuel, oil and
coolant).
Before putting the engine into operation it must be filled with oil and cooling liquid. Use
only oil and coolant as specified.
See latest Operators Manual.
Effectivity: 915 i A Series
Edition 0/Rev. 0
Page 13
December 01 2017
Summary of Contents for 915 iS 3 A
Page 165: ......
