Airplane Flight
Manual Cessna
F
150
L
Nr. 160
Converted with kit
NS402S with ROTAX 912 S3 and
Page:
2-3
HOFFMANN HO-V352F/170FQ+10
Revision 1
POWERRPLANT LIMITATIONS
ENGINE
Manufacturer
BOMBARDIER-ROTAX GmbH
Engine model
ROTAX 912S3
Engine operating limits
for take-off:
73.5 kW (100PS)/ 2385 Rpm
Continuous:
69kW (94 PS)/ 2260 Rpm
Note
The standard engine speed with full throttle should be (carburetor heat off and no
wind conditions) between 2260 und 2320 Rpm
Maximum oil temperature:
130°C (266°F); Desired area 90-110°C (194-230°F)
Oil Pressure:
min. 0.8 bar (12psi)
– @ 1400 Rpm
2-5bar(29-73psi) over 1400 Rpm
Maximum oil pressure:
7,0 bar (102 psi) only short term when cold starting
Max. cylinder head temperature:
135°C (275°F)
PROPELLER
Propeller manufacturer:
Hoffmann Propeller GmbH & Co. KG.
Propeller model:
HO-V352F/170FQ+10
Propeller diameter:
1,80 m
ENGINE INSTRUMENT MARKINGS
Engine instrument markings and their significance are in the table below
Instrument
Green Arc
Yellow Arc
Red stipe
Normal area
caution area
limit (min. or max.)
RPM
1700 - 2260 Rpm
2260
– 2385 Rpm
2385 Rpm
Oil temperature
90-110°C
(194-230°F)
-
50°C (122°F)
130°C (266°F)
Oil pressure
2
– 5 bars
0.8-2 bar (12-29psi)
5-7 bar (73-102psi)
0.8 bar (12psi)
7 bar (102psi)
Cylinder head
-
-
135°C (275°F)
Fuel pressure
0.15 - 0.4 bar
(2.2
– 5.8 psi)
-
0.15 bar (2.2 psi)
0.4 bar (5.8 psi)
Summary of Contents for CESSNA 150
Page 80: ...BLANK PAGE...