Gebrauchsanweisung ○ Mode d’emploi ○ Istruzioni per l’uso ○ Instruction for use
•
NOTE:
1)
Never start the blender when the blender jar is empty.
2)
Never attach or remove the blender jar when the motor is running.
3)
Always put the blender jar's lid and plunger on after putting the ingredients in.
4)
Never fill it with boiling hot liquids.
5)
Only fill it up to the 1.5 l. mark.
6)
Never reach into the blender when it is attached. The blade is very sharp and
pointed.
•
CLEANING AND CARE
1)
Always pull the mains plug out before cleaning the appliance or removing the
accessories/attachments.
2)
Rinse the main bowl, blender jar, lid spatula and plunger. Remove any encrusted
residue with a nylon brush. Rinse and dry carefully.
3)
The universal blade, agitator, cutting or grating attachment and the disc can be
washed in the dishwasher. The cutting edge of the universal blade and the cutting
and grating attachment are very sharp. Be careful when you use them: Risk of
injury!
4)
When you wash the universal blade by hand, only grasp it by the plastic handle.
Remove any remaining ingredients/mixture using a nylon brush. Rinse and dry
carefully.
5)
Never immerse the motor base or power cord in water, simply clean them with a
damp cloth. Stubborn stains can be removed with a little washing up liquid. Never
use scouring agents! Rub the motor base and power cord dry with a soft cloth.
6)
The mains power cable may only be replaced by an authorised customer service
centre. If any repairs have to be carried out, insist on the use of original spare
parts only.
•
TROUBLESHOOTING
o
If when working with the main bowl (12) the appliance does not turn on, check the
following points:
a)
Is the main bowl inserted and locked in place correctly?
b)
Is the lid for the main bowl on properly and locked in place on the motor
block?
c)
Is the cover for the mixer drive closed?
