Gebrauchsanweisung ○ Mode d’emploi ○ Istruzioni per l’uso ○ Instructions for use
59
•
WORKING MODES
Caution:
o
If the mixing bowl is to be used to its maximum filling capacity of 3 litres, we recom-
mend not to exceed the running speed 1 under any of
the working modes.
o
In a standby mode, press the “Temperature
⇌
Time” -
button (F) for a few seconds to reset all settings. The
display shows:
Mode 1: mixing mode
o
Attach the required tool (beater, whisk or kneading hook), fill up the bowl and lock
the mixer head in its working position (see section “Assemble and use the tools”).
Plug in the appliance and rotate the knob to the “OFF” – position, otherwise, the LCD
indicator light will keep flashing.
o
Press the “Temperature
⇌
Time” - button (F) to set a working time (from 1 minute to
3 hours). The LCD indicator light will stop flashing 3 seconds after the time setting.
o
Rotate the knob to set a working speed (from 1 to 8).
o
The appliance will start processing and count down the scheduled timing. Rotate the
knob to the “OFF” - position to stop the appliance and pause the countdown. Resume
the operation by turning the knob again to a working speed.
o
A sound signal indicates when the working time is over and the LCD indicator light
keeps flashing.
o
Rotate the knob back to the “OFF” - position and wait for the appliance to come to a
complete stop before proceeding in the reverse order of the assembly to empty the
bowl and dismantle the tool.
Notes:
o
If no time is set, the time counter runs (1.2.3.4…) and the appliance will stop auto-
matically after 3 hours.
o
Press and hold the “pulse” button for the appliance to run up to speed 8. Using a suc-
cession of pulses can give better control to mix, whisk or emulsify certain food. Re-
lease the pulse button to switch back to the selected speed.
