Gebrauchsanweisung ○
Mode d’emploi
○
Istruzioni per l’uso
○
Instruction for use
33
•
INITIAL USE
o
Open the cardboard packaging.
o
Now remove all plastic films.
o
Check the device, mains plug and cable for damage.
Clean before using for the first time
o
For reasons of hygiene, we recommend rinsing the air humidifier, water tank and pad
thoroughly with cold water before using for the first time.
Filling the tank
o
Fill the tank when putting the appliance into operation for the first time or if the red
indicator “Water Less” is illuminated, indicating that the water level is too low.
•
OPERATION
Operation condition
o
The working environment for the humidifier is when the temperature is between 5
to 40°C, and relative humidity is lower than 80%.
o
Operate the machine at low mist level when the room’s relative humidity is higher
than 70% or it is in an enclosed room space.
o
Use clean water under 40°C.
o
For reasons of hygiene, we recommend rinsing the air humidifier, water tank and pad
thoroughly with cold water before using for the first time, when used again after a
long time.
Operation Steps
o
Place the humidifier on a flat, even and waterproof surface. Make sure it is in a stable
position. For safety reasons, the humidifier must be at least 1,2 m
away from other
objects.
o
The humidifier must not be plugged into the mains when you are filling the water tank.
o
Remove the cover from the air humidifier.
o
Fill the water tank with cold tap water.
o
Fill the water tank directly from the top or pull the water tank out of the humidifier by
using the handle.
o
Replace the water tank in the air humidifier.
o
Replace the cover on top of the air humidifier.
o
Plug the humidifier into the mains and press the “POWER”
switch. The indicator lamp
“Max”
will light up.
