background image

Copyright © 2005 by T. R. Metal Crafters Inc.  All rights reserved.  This manual, or parts thereof (including charts, tables, and
illustrations), may not be reproduced in any form without the prior written permission of the copyright owners.

011205

Y70293A

LOYAL MANURE SPREADER

Model MS23A

Owner's and Operator's Manual

011205

Y70293A

Read

 and 

Understand

 this manual

Before Operating

IMPORTANT

This manure spreader was test-run, inspected,
and carefully packaged prior to shipment.  Note
any visible damage or shortages on carrier's
delivery receipt before signing.  If there is
concealed damage, do not dispose of packing
materials.  Contact us immediately so a timely
freight claim can be filed.

Operator's

Manual!

WARNING:

  This manure

spreader has rotating parts &
shafts.  Use care during
operation and maintenance.

Additional Assistance

If any items covered in this manual are not fully understood by you, contact your dealer or T.R. Metal Crafters,
Inc., 312 E. Industrial Drive, P.O. Box 248, Loyal, WI  54446, (call TOLL FREE 1-800-842-5349) for assistance.

Read 

and 

Understand

 this manual

Before Operating

FAILURE TO HEED COULD RESULT IN PERSONAL INJURY OR DEATH

Summary of Contents for MS23A











Reviews: