3
Equipment Operation
Follow the guidelines below to ensure safe operation of the unit:
1. NEVER access dangerous chemicals or other materials to prevent possible hazard of explosion
and damage.
2. Do not operate the unit without lids or covers to prevent possible hazards.
3. A temporary conductivity caused by condensation might occur even though this series is rated
Pollution Degree 2 in accordance with IEC 664.
Symbols
The following symbols are used on the power supplies:
Indicates an area where a potential shock hazard may exist.
Consult the manual to avoid possible personal injury or
instrument damage.
Indicates disposal instruction.
DO NOT
throw this unit into a municipal trash bin when this unit
has reached the end of its lifetime. To ensure utmost protection
of the global environment and minimize pollution, please recycle
this unit.
Caution/ Warning: Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
Max. voltage: 500 V
Max. current: 400 mA
Max. watt: 120 W
Encountering Problems
Check the troubleshooting section.
Call Technical Service under 0049 721 5606-0
If the unit must be shipped back for repair, contact Carl Roth GmbH + Co. KG for shipping
instructions. The unit will be repaired or replaced as quickly as possible and returned to you.
Contact: Phone 0049 721 5606-0; Fax 0049 721 5606-149;
All Roth products available for delivery have undergone rigorous quality controls.
PACKING LIST
No. Items
Description
1
Power Supply
1
Power Cord
1
Instruction Manual
