6
CONTROL INTERFACE
You will be able to find six buttons and 6 LED indicators from the faceplate.
The LED indicates the status of the unit.
Lighting Indications
LED light indicates operation condition while running.
– Indicates the setting mode of voltage
– Indicates the setting mode of current value
– Indicates the setting mode of time
Button Functions
1.
Before operation, press “MODE” to set the parameters of “Voltage”, “Current”, and
“Time” of Step 1 and 2. LED light indicates your current parameter. For example, if you are setting
a value for Voltage, the Voltage LED will be lit.
2.
Two step buttons are available for you to select the step and to check the
parameters of voltage, current and time of each step. User will press “STEP 1” and “STEP 2”
buttons mainly to switch between two steps.
3.
– Increase the value of current parameter.
4.
– Decrease the value of current parameter.
5.
– Start or stop operation
.
nanoPAC-300P
-------------
