86
GB
1
Installing positions
The device can be mounted on the
ceiling and on the floor, as well as
vertically or horizontally on a wall.
Make sure that no water can enter
the device if it is supposed to be
mounted vertically.
2
Installation brackets
1.
Remove the two hex head screws
on either side of the device.
2.
Attach the installation bracket to
the upper and lower screw.
3.
Tighten the two hex head screws.
3
Installation site
1.
Mark the holes of the installation
brackets on the wall.
2.
Drill the holes and fit the plugs.
3.
Install the device with the screws.
4
Install duct section
1.
Install the air duct sections of
at least 1 meter length on both
sides of the appliance.
2.
If required install further support
for the air duct sections.