Usage
27
GB
The correct working temperature depends on various factors such as:
- the solder used
- the size and thickness of the workpiece
- the material and the thermal conductivity of the workpiece
Before soldering, the soldering tip
7
/
10
has to be tinned. To do this,
heat up a new or a soldering tip that has been cleaned using the cleaning
sponge
8
and coat it by making contact with the solder wire.
Working temperature
Soldering
NOTE!
For long breaks / work interruptions, disconnect the
mains plug from the socket.
• When soldering, start with
a low working temperature
(setting 1 - 2) and increase
the temperature if necessary.
The appropriate working
temperature is reached when
the solder begins to melt as
soon as it comes into contact
with the soldering tip.
• Use a higher temperature
(setting 3 - 4) for desoldering,
depending on the strength
of the solder joint to be
desoldered.
Setting 1-2
Setting 3-4
1500003258_Anleitung_DE_GB_FR.indb 27
1500003258_Anleitung_DE_GB_FR.indb 27
29.11.2019 08:31:16
29.11.2019 08:31:16
