ENGLISH
13
1
Safety Notes
1.1
Intended use
The user bears sole responsibility for any damage caused by improper use.
Generally accepted accident prevention regulations and the enclosed safety information must be
observed.
ROBEND 4000 E:
The ROBEND 4000 E is suitable for bending copper, stainless steel and carbon steel pipes.
This device may only be used correctly as described.
Use only original ROTHENBERGER or CAS (Cordless Alliance System) battery packs and ac-
cessories.
Charger and battery:
The chargers are only suitable for charging ROTHENBERGER and CAS (Cordless Alliance Sys-
tem) battery packs.
This tool is not designed for use by persons with physical, sensory or mental disabilities, or with
insufficient experience and/or knowledge, unless they are supervised by a person responsible
for their safety, or have received instructions on how to use the tool by this person.
Never attempt to charge batteries that are not rechargeable. Danger of explosion!
Battery packs marked with CAS are 100% compatible with CAS devices (Cordless Alliance Sys-
tem). To select the appropriate device, please contact your ROTHENBERGER dealer. Read the
relevant instructions for the devices used.
1.2
General Power Tool Safety Warnings
WARNING! Read all safety warnings, instructions, illustrations and specifica-
tions provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious inju-
ry.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your electrically-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a)
Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b)
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or
fumes.
c)
Keep children and bystanders away while operating a power tool.
Distractions can
cause you to lose control.
2) Electrical safety
a)
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
c)
Do not expose power tools to rain or wet conditions.
Water entering a power tool will in-
crease the risk of electric shock.
d)
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges and moving parts.
Damaged or
entangled cords increase the risk of electric shock.
e)
When operating a power tool outdoors only, use an extension cords suitable for out-
door use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
