16
ENGLISH
a)
Recharge only with the charger specified by the manufacturer.
A charger that is suita-
ble for one type of battery pack may create a risk of fire when used with another battery
pack.
b)
WARNING! Use power tools only with specifically designated battery packs
and respectively battery types.
Use of any other battery packs may create a risk
of explosions, injury and fire.
c)
When battery pack is not in use, keep it away from other metal objects like paper
clips, coins, keys, nails, screws, or other small metal objects that can make a connec-
tion from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
d)
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help.
Liquid ejected from the battery may cause irritation or burns.
e)
Do not use a damaged or modified battery.
Damaged or modified batteries can behave
unexpectedly and lead to fires, explosions or injuries.
f)
Do not expose a battery for fire or high temperatures.
Fire or temperatures above 130°C
(265°F) can cause an explosion.
g)
Follow all the instructions for charging and never charge the battery or the cordless
tool outside the temperature range specified in the operating instructions.
Incorrect
charging or charging outside the permitted temperature range can destroy the battery and
increase the fire risk.
6) Service
a)
Have your power tool serviced by a qualified repair person using only identical re-
placement parts.
This will ensure that the safety of the power tool is maintained.
b)
Never service damaged batteries.
All maintenance of batteries should only be carried out
by the manufacturer or authorised customer service points.
1.3
Special safety instructions
ROTIGER CL:
Hold the power tool by insulated gripping surfaces, when performing an operation where
the cutting accessory may contact hidden wiring
. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool "live" and could give the operator an electric
shock.
Use clamps or another practical way to secure and support the workpiece to a stable plat-
form.
Holding the work by your hand or against the body leaves it unstable and may lead to loss
of control.
Remove the battery pack from the machine before any adjustment or maintenance is car-
ried out.
Before fitting the battery pack, make sure that the machine is switched off.
CAUTION!
Do not stare at operating lamp.
If the machine is defective, remove the battery pack from the machine.
Always wear protective goggles, gloves, and sturdy shoes when working with this tool.
Ensure that the spot where you wish to work is free of power cables, gas lines or water pipes
(e.g. using a metal detector).
When sawing water pipes, ensure that they do not contain any water.
Wear ear protectors when working for long periods of time.
High noise levels over a pro-
longed period of time may affect your hearing.
Materials that generate dusts or vapours that may be harmful to health (e.g. asbestos) must not
be processed.
Do not reach under the workpiece while the machine is in operation.
Do not try to saw extremely small workpieces.
Summary of Contents for 1200003954
Page 295: ...NOTES ...
